Worried about Measuring? Add Measure with ConfidenceTM!
Call 1-800-816-6422 for Support.
Filler

Filler

Fillers have a 1/16″ edge radius and are finished on the face and all edges. Fillers can be used in a traditional filler application or as a valance, crown moulding riser or other trim. The minimum width is 2.5”, and maximum height is 91”. The grain runs the height dimension.

Finish - Solid Only

  • Finish *

Dimensions

Measurements are communicated in Width x Height in inches, rounded to the nearest 1/16” (.0625). Use the Conversion Table for assistance converting inches to decimals.

Width must be greater than 3” and less than 48”.
Height must be greater than 3” and less than 91”.

  • Width *

    Min: 3Max: 48

  • Height *

    Min: 3Max: 91

  • Square Feet *

  • Price - Minimum *

  • Price - Calculated *

  • Weight (kg) *

Total:

Category: